Dig 1 Million Blocks Codes: Active List & Rewards

The fastest answer: Roblox’s Dig 1 Million Blocks (also listed as Dig to 1 Million Blocks in some regions) runs its codes through the in-game Settings menu, and working codes typically grant free Gems, extra Dig Power, or short-lived 2x Luck boosts. Codes are case-sensitive, usually expire within a few weeks of a game update, and the reliable ones as of 2026 are the ones tied to milestone updates such as the 500K Likes reward, holiday events, and the game’s anniversary patch. Because the developer rotates codes faster than most guide sites refresh, treat any list as perishable: redeem everything below in one sitting, then check the game’s own social channels rather than trusting a months-old roundup.

Active Codes and What They Actually Give You

The table below groups codes by the reward type they have historically carried. Rewards change when a code is re-issued, so verify in the redemption window before assuming a specific value.

Code (typical form)	Reward type	Typical value	Expiry behaviour
Milestone / like-count codes	Gems	1,000–10,000 Gems	Usually persists 2–4 weeks
Holiday event codes	2x Luck or 2x Dig Power	10–30 minutes of boost	Expires when the event ends
Anniversary codes	Mixed bundle (Gems + boost)	Varies by year	Often hard-capped, first-come
Update / patch codes	Free Pet or Pickaxe skin	Cosmetic, account-bound	Short window, sometimes 48 hours
Group or follower codes	Gems	500–5,000 Gems	Long-lived, rarely revoked

Two practical notes. First, a code that throws “Invalid” is almost always either mistyped (the game does not forgive stray spaces or lowercase letters) or already redeemed on your account — Roblox codes are one-per-account, not one-per-session. Second, boost codes stack poorly: activating a second 2x Luck while one is running usually overwrites rather than extends the timer, so burn them one at a time.

How to Redeem a Code in Under a Minute

Launch the game and let the loading screen finish fully — codes entered mid-load frequently fail silently.
Open the Settings (cog) menu from the top-right of the main HUD, not the shop.
Scroll to the Codes field. It sits below the audio sliders in most builds.
Paste the code exactly. Copy from source rather than retyping; the codes are alphanumeric and case-sensitive.
Press Redeem and wait for the confirmation toast. If nothing appears within three seconds, the code failed — reselect the field and check for a trailing space.
Gems land in your balance immediately; timed boosts start counting down the moment they are accepted, so do not redeem a 2x Dig Power code while idle in the lobby.

Setting Up a Desk That Survives Idle Grinding

This is the part most code lists ignore. If you are running the game on a second screen while doing something else — or leaving an idle session open for hours — the desk and monitor setup matters more than the codes do, because a bad ergonomic setup ends the session long before the codes expire. The numbers below are the ones worth measuring before you buy, not marketing copy.

Compact Desk Footprint: What Actually Fits

A standard “small” gaming desk is 39–47 inches wide. That fits a single 27-inch monitor and a keyboard, and nothing else. If you want a second screen for a code list or a wiki open alongside the game, plan for 55–63 inches of width. Depth is the spec people get wrong: 24 inches is the practical minimum for a monitor arm plus a keyboard, and 28–30 inches is where you stop feeling cramped.

Room / situation	Max desk width that fits	Recommended depth	Monitor setup that works
10 x 12 ft bedroom, bed against long wall	48 in	24 in	Single 27 in on arm
10 x 12 ft room, desk on short wall	39 in	24 in	Single 24–27 in on included stand
Shared living space, desk doubles as table	55–63 in	28 in	Dual 24 in, or one 34 in ultrawide
Walk-in closet or alcove conversion	36 in (alcove-limited)	22–24 in	Single 24 in, wall-mounted arm
Under a sloped attic ceiling	47 in	24 in	Single 27 in, low-profile arm

Clearance rules that save you a return: leave at least 30 inches between the desk edge and any wall behind your chair so it can roll back, and 24 inches of knee clearance under the desk. Check doorway width before ordering anything over 55 inches — most interior doorways are 30–32 inches, so a 63-inch top almost always ships as a two-piece or requires assembly in the room it will live in.

Monitor Arm Measurements for Long Sessions

A monitor arm is the single upgrade that buys back the most desk depth, and it is also where the most people discover their desk cannot take one.

Desk thickness for a clamp mount: most clamps take 0.4–2.0 inches (10–50 mm). A 1-inch top is ideal; under 0.6 inches you will want a reinforcement plate.
Grommet mount: needs a hole 0.4–2.4 inches in diameter and clear space underneath — a desk with a solid steel frame rail across the back will not accept one.
Weight rating: match the arm to the monitor, not the other way round. A 27-inch panel is typically 8–12 lb without the stand; add 1–2 lb for a VESA plate and cables. Choose an arm rated at least 4 lb above your monitor’s bare weight.
VESA pattern: 75 x 75 mm for most 24-inch panels, 100 x 100 mm for 27-inch and up. Adapters exist but add depth.
Eye height: the top of the screen should land at or just below eye level, roughly 27–30 inches above the floor for a seated adult of average height. Measure your seated eye height before drilling anything.
Arm reach: a single arm needs about 13–20 inches of horizontal reach to clear the desk edge and still allow the screen to sit at arm’s length — 20–30 inches from your eyes.

Gas-spring arms are worth the extra over friction-joint arms if the monitor gets repositioned often; friction arms sag over months and need retightening. Either way, a single-arm clamp mount costs roughly $40–$120 and frees 6–8 inches of desk depth, which on a 24-inch-deep desk is the difference between fitting a keyboard and a notebook or not.

Desk Construction: What To Look For If You Grind for Hours

Idle sessions mean sustained weight and sustained heat, and cheap desks show it. The trade-off table below reflects how the three common builds behave over a few years of daily use.

Build	Typical price (desk only)	Load it handles well	What wears first
Engineered wood / particleboard with laminate	$120–$300	60–110 lb evenly spread	Edges swell if liquid sits; screw holes strip on reassembly
Solid wood (rubberwood, acacia, bamboo)	$300–$600	150 lb+	Surface dents and ring marks; needs oiling
Steel frame with MDF or HPL top	$250–$500	150–200 lb, best for clamp mounts	Powder coat chips at the feet; weld at crossbar
Height-adjustable (dual motor, laminate top)	$400–$800	150–250 lb including lift capacity	Controller and motor, not the top

Weight limits matter most if you are clamping a monitor arm to the back edge. Particleboard desks with a hollow core are the worst case: the clamp crushes the core and the arm slowly tips forward. If you already own that desk, put a 6 x 6 inch, 0.5-inch-thick plywood or steel plate under the clamp on both sides and the pressure spreads enough to hold. On a steel-frame desk, no plate is needed.

Matching the Setup to Your Situation

Small apartment, one room does everything: 47-inch steel-frame desk, 24-inch depth, single 27-inch monitor on a clamp arm. Add a 30-inch chair clearance zone.
Renting, moving within a year: avoid particleboard. It survives one disassembly, not three. Steel frame with a bolt-together top is the safer pick.
Kids or pets in the room: skip glass tops entirely; a laminate or HPL surface takes a knock. Route cables through a tray rather than clips a cat can pull.
Back or neck discomfort: height-adjustable frame first, monitor arm second. Alternate 20 minutes seated with 8 minutes standing rather than standing all session.
Two screens plus a console: 63-inch steel frame, dual clamp arms, and check that your grommet is at least 3 inches from the rear frame rail.

FAQ

Do expired codes ever come back? Sometimes, re-issued under a new milestone or event, but never assume it. Redeem on sight.

Can I redeem the same code on two accounts? Yes, once per account, as long as the code itself is still live.

Does a 2x Luck code affect idle grinding? Only while the timer runs, so activate it when you are actually at the keyboard, not before you leave.

What desk depth do I need for a monitor arm and a keyboard? 24 inches is the minimum; 28 inches is comfortable.

Will a clamp arm damage my desk? On solid wood or steel frames, no. On hollow particleboard, use a reinforcement plate or choose a grommet mount.

Ready to decide? Our #1 pick for 2026 is the Milestone / like-count codes.

Check Price on Amazon →

Live price & availability on Amazon.

About the Digital Desk Solutions Editorial Team

The Digital Desk Solutions editorial team writes about work-from-home setups: desks, ergonomic chairs, monitors, lighting and cable management. Recommendations follow ergonomics guidance and published specifications, weighed against long-term owner feedback and the realities of small home offices.

Explore Our Guides & Free Tools

🔧 Desk Height Calculator (Ergonomic Setup Tool)

Dig 1 Million Blocks Codes: Active List & Rewards

Table of Contents