Last Updated: October 12, 2026
📄 In This Review
The Hidden Bunker in Arc Raiders: Where It Is and What’s Inside
The hidden bunker sits in the buried maintenance layer of the Spaceport map, accessed through a service hatch behind the collapsed landing pad on the far west edge — you won’t find it from the surface roads, and there’s no objective marker for it. Bring a light source and at least one teammate, because the interior is dark, tight, and easy to get lost in on your first run.
Finding the entrance
See also: How to Get the Demon Slayer Rod in Fisch • How to Get the Assassin Class in 99 Nights in the Forest
From the west spawn, hug the perimeter wall rather than cutting across the open tarmac. You’re looking for three landmarks in sequence:
- The collapsed pad — a tilted slab of concrete with rebar curling out of it. Pass it on the north side.
- The drainage channel — a shallow concrete trench running roughly 60 meters toward the hillside. Follow it to its end.
- The service hatch — a rusted rectangular door set into the hillside, roughly 1 meter tall and 1.5 meters wide. It is not lit, not marked, and does not glow. If you’re standing at the end of the trench and see only rock, look for the hinge side; the door reads as scrap metal until you get within a few meters.
Once inside, the corridor descends and forks. Left leads to the storage rooms, right to the control deck.
The loot route, room by room
The bunker rewards a specific order of operations. Loot the low-tier rooms first while the entrances are still quiet, then push to the high-value rooms and leave via the secondary exit. If you do it in reverse, you’ll be carrying your best loot through the most contested hallway on the map.
| Stop | Room | Typical contents | Time to clear | Risk |
|---|---|---|---|---|
| 1 | Entry corridor lockers | Common crafting mats, small ammo | 30–45 sec | Low |
| 2 | West storage bay | Weapon parts, medical supplies | 1–2 min | Low–medium |
| 3 | Generator room | Rare electronics, keys | 1–2 min | Medium |
| 4 | Control deck | High-tier weapons, secure containers | 2–3 min | High |
| 5 | East service tunnel | Exit route, occasional dropped loot | 1 min | Medium |
The generator room is the sleeper pick. Most players skip it because it’s off the main corridor and looks empty from the doorway, but the electronics crates there are the ones that consistently hold the highest-value crafting components.
Why your desk shape matters for bunker runs
Long interior sweeps like this one put a specific kind of strain on your setup, and it’s not what most people expect. You’re not moving fast; you’re holding a slow, tight camera angle while checking corners, then snapping your view left and right at each doorway. Over a 40-minute session that’s a lot of small, high-frequency mouse travel in a narrow field.
An L-shaped desk handles this better than a straight desk for two reasons. First, it gives you somewhere to drop your left forearm between fights without leaving the play zone. Second, it puts your monitor at the inside corner, which means your natural seated position faces the screen squarely while both wings of the desk stay within reach — you can keep a second display or a notes surface at an angle instead of craning.
Getting the geometry right
For a 6-foot desk wing, aim for these numbers rather than guessing:
- Desktop height: 28–30 inches for most seated players. Above 30 inches and you’ll find yourself hunching to keep your forearms level.
- Clearance under the return wing: at least 24 inches of depth and 25 inches of height if you want a chair armrest to slide under it.
- Distance from eye to monitor: 24–32 inches. On an L-desk, the inside corner lets you hit that number without pushing the monitor to the back edge.
- Room fit: a 30-inch deep L-desk with a 60-inch main run and a 48-inch return needs a space of at least 5 ft by 7 ft to leave walking room behind the chair.
- Weight capacity: look for at least 100–150 lbs per wing if you’re mounting a monitor arm and keeping a PC tower on the desk.
If your room is smaller than 5 ft by 7 ft, a 48-inch main run with a 36-inch return is the realistic floor before the desk starts eating your whole floor plan.
Cable management for a dark, cluttered map
Bunker sections are visually noisy, and a tangle of cables at your feet makes a bad match for that. Two practical moves: run a single under-desk cable tray along the back edge of the main wing rather than using adhesive clips, and route every cable through it before it drops. Then bundle the drop itself — the run from desk to floor — into one sleeve. The goal is that nothing crosses your footwell, because that’s where a snagged cable turns a firefight into a stumble.
For a monitor arm mounted on the inside corner, drill your routing hole on the wing closest to the wall, not the visible wing. It keeps the sleeve out of your peripheral vision, which matters more than it sounds like it should when you’re scanning dark corners for 40 minutes.
Desk type trade-offs
| Type | Typical price range | Weight | Wears first | Best for |
|---|---|---|---|---|
| Engineered wood top, steel frame | $200–$450 | 60–90 lbs total | Edge veneer chips; corner joints loosen | Renters, frequent movers, tight budgets |
| Solid wood top, steel frame | $500–$1,200 | 100–160 lbs total | Surface scratches; needs refinishing every few years | Long-term setups, heavy monitor arms |
| All-metal, full frame | $350–$800 | 110–180 lbs total | Powder coat scuffs; frame welds on cheap units | High weight loads, humid rooms |
| Adjustable sit-stand, engineered top | $450–$1,000 | 90–150 lbs total | Motor or control box fails before the top does | Mixed work and play use |
The practical read: if you move apartments every year or two, engineered wood with a steel frame is the right call despite the veneer chipping, because a 160 lb solid wood desk is genuinely hard to get through a standard 30-inch doorway and up a stairwell without help.
Matching the desk to your situation
| Your situation | Recommended size | Key constraint |
|---|---|---|
| Small apartment, single monitor | 48 in main + 36 in return | Keep total footprint under 5 ft x 6 ft |
| Two monitors or monitor + notes screen | 60 in main + 48 in return | Needs 5 ft x 7 ft of floor space |
| Back or neck discomfort | Sit-stand L-frame, 60 in main | Set standing height at 40–44 in; alternate hourly |
| Kids or pets in the room | Any size with a fixed (non-adjustable) frame | Avoid motorized legs; anchor the return wing to the wall |
| Streaming or recording alongside play | 60 in main + 60 in return | Mic arm needs 20+ in of clearance from the inside corner |
Assembly and durability realities
Flat-pack L-desks ship in two boxes, and the main box is the one that hurts — expect 50–70 lbs for a 60-inch engineered top on its own. Measure your doorway and stairwell turn before ordering, not after. A 60-inch top will not fit through a 28-inch door opening upright; it goes through on its side and around corners diagonally.
What fails first, in rough order of likelihood: the corner bracket connecting the two wings, the cam locks on the return wing, then the desktop surface. If you’re buying new, check that the corner joint uses a steel plate rather than two wooden dowels — that single detail decides whether the desk still feels solid after a year of leaning on the inside corner.
FAQ
Does the bunker have more than one exit?
Yes. The east service tunnel is the secondary route, and it’s the one you want once you’ve cleared the control deck.
Do I need a light source inside?
Yes. The interior is unlit past the entry corridor and the darker rooms make loot containers hard to spot at a glance.
How wide does an L-desk need to be for a monitor arm?
At least 30 inches of depth on the wing the arm clamps to. Below that, the arm’s rear travel will push the monitor too close to your face at full extension.
Related Reviews & Guides
Standing Desk Mistakes (and How to Avoid Them)
Borderlands Vex Siren Guide: Skills, Build & Tips
